Flagpoles slip into form fit sleeves snugly - no voids to fill with sand. Standard sleeves require wood wedges and sand for a proper installation.

Galvanized Steel Foundation Sleeves The most common type of flagpole installation is the in-ground foundation sleeve method which calls for 1' of the flagpole to be encases in the ground sleeve for each 10' of the exposed flagpole height. The diameter...

Galvanized Steel Foundation Sleeves The most common type of flagpole installation is the in-ground foundation sleeve method which calls for 1' of the flagpole to be encases in the ground sleeve for each 10' of the exposed flagpole height. The diameter...

Trumpet collars are generally used with flagpoles where a shoe base is welded to the bottom; however, these trumpet collars can be used on standard in-ground mounted flagpoles if a higher profile is desired. Supplied in a standard wall thickness of .060"...

Standard Profile Aluminum Flagpole Flash Collars  Thickness 0.60 Color options Satin Clear Bronze...

Technora Rope assemblies are for internal halyard flagpoles. Technora rope assemblies have high performance fibers that are encases inside a polyester fiber yarn jacket resulting in a high strength, low stretch, U.V. and abrasion resistant flagpole...

Cable and Rope Thimbles Stainless Zinc

Stainless Steel Quick Links

Cable and Rope Crimps

Copper Cable Stop for 1/8" Cable

Stainless Steel Cable Swivel Connectors 2-3/4"L x 1-1/8"W 3-5/8"L x 1-3/8"W

Fabricated from 2" diameter steel and then coated with vinyl. The 3-1/2 pound weights are supplied with one eyebolt attached to one end while the 7 pound and 14 pound weights are supplied with an eyebolt attached to each end. Comes in three different...