Non-Tangle Rods For Wall Mounted Outrigger Flagpoles    Made to last. No Plastic.  Constructed of 3/8" diameter stainless steel rod. All sizes are supplied complete a with stainless steel fitting which attached to the grommet of the...

Tunnel Light Replacement Lens.

This light measure 6" x 4-3/4" and is ideal for taller flagpoles near airports or flight paths. ETL verified to FAA standards. Supplied standard with LED steady-burn bulb; please contact us if flasher unit is required. Set-up of flagpole to accept this...

Zinc plated steel complete with acorn nut, one washer, and one lock washer. 5/8" X 6" 

These Thru Wall Bolts are for mounting outrigger and vertical mount brackets. 5/8" Zinc plated steel complete with one acorn nut, one hex nut, two washers and two lock washers. Specify Length: 6" 12" 18" 24" 30" 36"

These Galvanized Steel Anchor Bolts are for flagpoles that have a shoe base welded on them. You can substitute a shoe base installation instead of using a foundation sleeve. These anchor bolts come complete with 2 Hex Nuts, 2 washers, and 1 lock washer...

Each Kit Contains 5' long by 1/2" diameter copper clad rod, one 3' long by 1/2" diameter copper wire plus one connecting bracket. You can also order items separately: 5' X 12" Rod Only Bracket Only Wire Only (Per Foot)

Flagpoles slip into form fit sleeves snugly - no voids to fill with sand. Standard sleeves require wood wedges and sand for a proper installation.

Galvanized Steel Foundation Sleeves The most common type of flagpole installation is the in-ground foundation sleeve method which calls for 1' of the flagpole to be encases in the ground sleeve for each 10' of the exposed flagpole height. The diameter...

Galvanized Steel Foundation Sleeves The most common type of flagpole installation is the in-ground foundation sleeve method which calls for 1' of the flagpole to be encases in the ground sleeve for each 10' of the exposed flagpole height. The diameter...

Trumpet collars are generally used with flagpoles where a shoe base is welded to the bottom; however, these trumpet collars can be used on standard in-ground mounted flagpoles if a higher profile is desired. Supplied in a standard wall thickness of .060"...

Standard Profile Aluminum Flagpole Flash Collars  Thickness 0.60 Color options Satin Clear Bronze...