Non-Tangle Rods For Wall Mounted Outrigger Flagpoles    Made to last. No Plastic.  Constructed of 3/8" diameter stainless steel rod. All sizes are supplied complete a with stainless steel fitting which attached to the grommet of the...

Tunnel Light Replacement Lens.

Each Kit Contains 5' long by 1/2" diameter copper clad rod, one 3' long by 1/2" diameter copper wire plus one connecting bracket. You can also order items separately: 5' X 12" Rod Only Bracket Only Wire Only (Per Foot)

Galvanized Steel Foundation Sleeves The most common type of flagpole installation is the in-ground foundation sleeve method which calls for 1' of the flagpole to be encases in the ground sleeve for each 10' of the exposed flagpole height. The diameter...

Galvanized Steel Foundation Sleeves The most common type of flagpole installation is the in-ground foundation sleeve method which calls for 1' of the flagpole to be encases in the ground sleeve for each 10' of the exposed flagpole height. The diameter...

Internal Halyard Doors For Aluminum Flagpoles comes with lock and keys Rectangular doors are for 6" diameter flagpoles. Oval shaped doors are for 7" through 12".  

HDT-1 Series Heavy Duty Flagpole Trucks For Flagpoles Up To A 5-1/2" Top Diamter Construction: Cast aluminum Pulley: 2-1/2" outside diameter cast aluminum on 1/2" stainless steel axle Truck spindle: 1-1/4" NPT threading Truck...

150 Series Double Flagpole Trucks   Fits up to 4" Diameter Flagpoles  Construction: cast aluminum Pulleys: 1-15/16" outside diameter cast nylon on 3/8" stainless steel axles Max halyard diameter: 5/16" Truck...

 HDT-2 Series Heavy-Duty Double Flagpole Trucks   Fits Flagpoles Up To A 5-1/2" Diameter   Construction: Cast Aluminum Max Halyard Diameter: 3/8" Truck Spindle: 1 1/4" NPT Threading Flagpole: Up to 5-1/2"...

The botonee cross is 12" tall and 12" wide. It is finished with gold paint. Spindle threading is 5/8"-11NC.

This aluminum cross is 13" tall and 6 3/4" wide. It is finished with gold paint. Spindle threading is 1/2"-13NC.

24" Gold flying Eagle Flagpole Ornament Spindle threading - 1/2"-13NC Height - 10"