Flagpole Misc Hardware

For use with the Wall Anchorage Kit - Optional When you need more coverage than the standard washer will cover, the 4" x 4" backing plate helps to cover more surace area.  Specifications: 4" x 4" Backing Plate - 7/8" Dia...

The Outrigger Retainer Kit allows the tension on the halyard to be relieved, facilitating both the raising and lowering of the flag while providing a way to unfurl a flag wrapped around an Outrigger Wall Mount Shaft. The system is offered as a complete...

Wall Anchorage For Use With Outrigger and Vertical Wall Mount Flagpole Systems The Wall Anchorage Kit consists of a 3/4″-10NC x 18″ Stainless Steel through bolt, 3/4″ Stainless Steel Nuts, Spring Lock Washers, Flat Lock Washers, and...

Engraved brass plaques are available and are curved to fit the butt diameter of the flagpole that you will be installing it on. Letter styles available are: Block Roman  The plaques are supplied with stainless steel rivets which are included. For...

Zinc plated steel complete with acorn nut, one washer, and one lock washer. 5/8" X 6" 

These Galvanized Steel Anchor Bolts are for flagpoles that have a shoe base welded on them. You can substitute a shoe base installation instead of using a foundation sleeve. These anchor bolts come complete with 2 Hex Nuts, 2 washers, and 1 lock washer...

Each Kit Contains 5' long by 1/2" diameter copper clad rod, one 3' long by 1/2" diameter copper wire plus one connecting bracket. You can also order items separately: 5' X 12" Rod Only Bracket Only Wire Only (Per Foot)

Cast aluminum construction. 1-1/2" outside diameter cast nylon pulley on a 1/4" stainless steel axle. Attached with two 1/4" stainless steel flat head screws or two stainless steel straps (not included). Maximum halyard diameter is 5/16". Not supplied as...