Telescoping Flagpole Parts

Toppers for Titan Telescoping Flagpoles We offer Ball Toppers for the top of your Titan Telescoping Flagpoles and are proudly made in the USA. The stems are all long enough to mount with a solar light on top. We have in the following...

We offer a Gold Eagle, a Natural Eagle, and Ball Toppers for the top of your Titan Telescoping Flagpoles. The eagles are 12" Cast Aluminum, and are proudly made in the USA. The stems are all long enough to mount with a solar light on top

The cushions provide a buffer to protect the Titan Telescoping Flagpole from damage when a section is lowered too quickly. Our Titan Telescoping Flagpoles use the following cushions at each joint (from the ground up): 15' & 20'LT – 2.5"& 2...

Red cap for Titan ground sleeve. The 2.5″ cap is for the 15′ and 20’LT poles. The 3.0″ cap is for the 20′ & 25′ poles.

Lexan plastic.  Inside diameter is 1 3/4″.

Anodized aluminum ball. 3″ Diameter. The replacement screws for these are  1/4″ diameter x 1/2″ long; 28 Threads Per Inch.   

ABS plastic tube 18″ in length.  Will fit inside the 3″ ground sleeve should you ever decide to downsize your Titan Telescoping Flagpole from a 3″ base to a 2.5″ base.

Colors: Silver Light Bronze Bronze/Black

ABS plastic sleeve 12″ in length for flagpole mounts.   Converts inside diameter of any of our flagpole mounts (or wheel stand) from 3.0″ to 2.5″ to fit a 15′ or LT Titan Telescoping Flagpole. If you need a reducer...

This is used primarily for RV camping or even tailgating in a parking lot! Powder coated aluminum “Hitch Mount”. The end that fits into the receiver is 15″ long and is a 2″x2″ square (outside measurement). The hole for the...

Lexan plastic ring.  Inside diameter is 1 3/4″. Colors White Silver Light Bronze Bronze/Black

Lexan plastic.  Inside diameter is 2 1/4″.